Process Black Plastisol InkProcess Black Plastisol Ink was formulated to produce the cleanest greatest intensity color for textile printing results, Four-color process inks are transparent inks that are being applied wet on wet. xenon’s process inks are sharp enough in intensity to get the desired colors.
- non-pththalate ink
- creamy & soft and very low wet tack for easy printing
- tack-free formulation
- no need to add reducers as the ink is ready for use
- recommended for both manual or automatic machines
Recommended Application For Process Inks
*Recommended mesh 86-110 and 60 to 80 durometer squeegee you may need to apply a heavier deposit of process ink for coverage, depending upon the color that you may desire. use 200-305 mesh count for fine lines.
use any emulsion
to make screens we recommend high solid one part " qxl " (45% solids).
For a heavier deposit of plastisol ink, you need a higher solids emulsion and application of two deposit of emulsion, two on print side and two on the squeegee side.
Cotton and 50/50 cotton / polyester fabrics
Print/ flash print for dark shirts and one stroke for lighter and white fabrics
fully cured at 350F
*store at room temperature and avoid storing in direct sunlight/humid air.
do not dry-clean after printing