 |
Light Gray Plastisol Ink with Excellent Opacity
Light Gray Plastisol Ink (COLOR MAY VARY FROM THE PICTURE) is an exceptionally high opaque ink that saves you money by avoiding under-basing and less application. Light Grey Plastisol Ink is a light grey color It is a non-phthalate high opacity plastisol ink for dark garments formulated to be especially opaque on the dark shirt, eliminating the need to use under-basing. this high-opacity ink is recommended for cotton and 50/50- poly/cotton note: we also manufacture plastisol ink for 100% polyester, PVC, and nylon- call to find out prices.
Highlights:
- Non-phthalate ink is exceptionally opaque ink.
- No need for under-basing - creamy & soft and very low wet tack for easy printing.
- Tack-free formulation.
- Very bright colors.
- Great printing because of the creamy nature of this ink and ease of using the ink there is no need to add reducers as the ink is ready for use and recommended for both manual and automatic machines.
Application recommendations for light Gray Plastisol Ink:
- Use mesh 86-110 for dark shirts- you need to apply a heavier deposit of plastisol ink for coverage on dark shirts.
- Use 110-305 mesh count for lighter colors. some heavy shirts such as sweatshirts may require an under-base.
- Whenever you are avoiding an under-base, make sure that you put a little heavier 2 coats- try it first, chances are you may not need an under-base.
- Squeegee 60 -70 - use a direct emulsion to make screens - we recommend high solid one part Like "QXL" (45% solids).
- For a heavier deposit of plastisol ink, you need a higher solids emulsion and the application of two deposits of emulsion, two on the print side and two on the squeegee side.
- Cotton and 50/50 cotton/polyester fabrics print/ flash print for dark shirts and one stroke for lighter and white fabrics fully cured @ 330F
*Store at room temperature and avoid storing in direct sunlight/humid air.
**Caution: Do not dry clean after printing**
|
|
|
LOVE THEIR INK 
