Home > Emulsion > Dual Cure Emulsion >

RESOLVE Dual Cure Emulsion for Plastisol & Water based Inks

Resolve Photo Emulsion for Plastisol & Water base Ink

ADD TO CART: $25.00

Product Code: E-0112

Size for Resolve*:


Resolve Photo Emulsion for Plastisol and Water-Based Inks.

Resolve Photo Emulsion for Plastisol & Water Base Ink is a water-resistant emulsion. It is recommended for both water and plastisol-based ink. Due to its high solid, it is easier to develop a thick stencil with a resolve that has a less wet coating. Resolve offers high resolution and sharp edge definition.

Specification Data:

type: water base
color: pink/green solids: 48%
viscosity: 15000 cps@ 20rpm, Brookfield RVF (after the addition of diazo)
volume: 9.00lbs/ gallon ph: 5.5
solubility in water: complete application: resolve is a fast-drying dual cure emulsion.

Exposure Resolve Photo Emulsion:

Distance should be about one and a half times the diagonal measurement of the artwork from the point of the light source. The times below are approximations of when you apply two coats on each side with the round edge at a distance of 40" from the light source. Metal halide 5-k 305 yellow 120 seconds 200 yellow 1 50 sec. 160 white 170 sec. 110 white 250 sec. Fluorescent tubes-10 tubes of 40 watts 110 white 240 seconds

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 Goes on great August 12, 2018
Reviewer: STEVE GRIFFIN from GREENSBORO, NC United States  
Smooth application, very good results. Love this stuff.

Was this review helpful to you?