|
Xen Black Plastisol Ink
Xen black plastisol ink (Xen-black) from xenon products is an exceptionally high opacity and non-phthalate plastisol ink. This high-opacity black plastisol ink is recommended for cotton and 50/50- poly/cotton.
*note: we also manufacture plastisol ink for 100% polyester, PVC, and nylon- call for prices.
WHY PAY MORE? Compare with the best!
Highlights Xen Black :
- Non-phthalate ink
- Exceptionally opaque ink
- Creamy & soft and very low wet tack for easy printing
- Tack free formulation
- Very bright colors
- Outstanding printing because of the creamy nature of this ink and ease of using the ink
- There is no need to add reducers as the ink is ready for use.
- Recommended for both manual and automatic machines
Application Recommendations for Xen Black Plastisol Ink:
- Mesh 86-110 - applying a heavier ink coat for white and light-color fabrics is unnecessary.
- 110-305 mesh count is ok.
- If you are printing black on color shirts, you may use 86-110 mesh -
- For lighter colors and white, use 160-305 mesh counts.
- squeegee 60 -70 a
- Use any xenon products direct emulsion to make screens- we recommend high solid one part "Qxl" (45% solids). For a heavier deposit of plastisol ink for printing dark shirts, you need a higher solids emulsion and the application of two coats of emulsion, two on the print side and two on the squeegee side.
- cotton and 50/50 cotton/polyester fabrics
- One stroke of application is needed for white and lighter colors.
- fully cured @ 330 f in the dryer for one minute and twenty seconds
- The dryer has to be maintained so that the temperature at the print is at 320-350F for one minute and twenty seconds for a complete fusion that would give the print a longer washability and fusion. The ink sometimes does not fuse properly due to low voltage- Test the temperature with a laser gun. THE BEST COURSE IS TO CHECK ONE SHIRT OR PELLON FOR FUSION OF THE INK.
- Do Not Dry Clean
- Store at room temperature and avoid storing in direct sunlight/humid air.
*Caution: do not dry clean after printing
Xen Black Plastisol ink Highlights
|
|
|