Home > Chemicals >

ONE STEP Ink & Emulsion Remover

ONE STEP Ink & Emulsion Remover

ADD TO CART: $15.00

Product Code: C-1007

Size for one3*:

ONE STEP Plastisol ink cleaner, Reclaimer, Haze Remover and Degreaser. We recommend ONE STEP for Dip Tank use. The reason is that Plastisol ink cleaners (press wash, ink wash or ink degradants) are basically solvent based products. The majority of solvents dissolve or liquefy the Plastisol ink by separating PVC from the plasticizer in the mix. The solvent in ONE STEP is an alcohol, compatible with the oxidizer; any other solvent will be attacked. The second reason for the recommendation of a Dip Tank is that the screen with ink and emulsion has to be soaked for few minutes and then requires power washing to get a clean screen. You can add up to five times water into the product and you would still have strong cleaner and reclaimer. ONE STEP is four products combined in one product. That makes it very economical and convenient way to perform all those functions in one step. ONE STEP reclaims Emulsion and Direct capillary film, Blockout and cleans the pallet adhesive as well. As a stripper it dissolves and removes direct emulsion & capillary film. As an Ink Degradent it removes the plastisol inks from the screen by dissolving the textile inks. ONE STEP cleans ink by slowly degrading the plastisol ink, The excess Plastisol ink must be removed by a rag or sharp squeegee before submersing the screens in the Dip Tank for few minutes. ONE STEP may be used by spraying the screen with Plastisol & emulsion and rubbing by a rag or scrub brush and power washing it. Since ONE STEP is a water based product, the spray or wetting rug with the product procedure and cleaning the ink is not very advisable.


  • Color: Pale Yellow
  • PH: 9.5

  • Very low VOCs
  • non-flammable, bio-degradable and safe product.
  • concentrated liquid and three (water) to 2 ONE STEP) mixture is recommended. But customers have added as much as 4 to 1 ratio.
  • offers economy and efficiency to do four functions in one procedure, thereby saves money and time


Remove the excess ink (very important) from the screen, apply ONE STEP on both SIDES of the screen by spraying or with a brush or rag, let it stand for few minutes, scrub then power wash. For dip tank use, scoop off excess ink soak for few minutes then scrub and power wash. If haze or stains still remains on screen, use a haze remover.

Average Rating: 3.5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
February 25, 2019
Reviewer: DeeJay Baggs from Chicago, IL United States  

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Very strong product July 19, 2017
Reviewer: Conor B from Miami FL  
Got all the emulsion off the screen with ease.  will use again!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Harsh November 8, 2016
Reviewer: Gerry Welch from Clovis, CA United States  
Very harsh, cannot use even with a respirator. Did not dissolve emulsion, made it come off in chunks. Not happy.

Was this review helpful to you?