Home > Ink >

Maroon Plastisol Ink

Maroon Plastisol Ink


 
Alternative Views:


ADD TO CART: $29.95




Product Code: I-3017


Size for maroon*:


Qty:  
Overview
 

MaroonPlastisol Ink

Maroon Plastisol is a high-opacity ink. Maroon Plastisol Ink (COLOR MAY VARY FROM THE PICTURE) is a non-phthalate high-opacity plastisol ink for dark garments. It is recommended for cotton and 50/50- poly/cotton note:


We also carry plastisol ink for 100% polyester, PVC, and nylon. Just call, and we'll direct you right to it.

Suggested Application for Maroon Plastisol:

Use mesh 110 for dark shirts - apply a heavier deposit of plastisol ink for coverage on dark shirts. Use 160-305 mesh count for lighter colors. Some heavy shirts, such as sweatshirts, may require an under-base. So whenever you are avoiding an under-base, put two heavier coats. Try it first; there is a possibility that you may not need an under-base. Use squeegee 60 -70 and use any direct emulsion to make screens - we recommend high solid one part "QXL" (45% solids).

For a heavier deposit of plastisol ink, you need a higher solids emulsion and the application of two deposits of emulsion, two on the print side and two on the squeegee side. Cotton and 50/50 cotton/polyester fabrics print/ flash print for dark shirts and one stroke for lighter and white materials fully cured @ 330F
  • The dryer has to be maintained so that the temperature at the print is at 320-350F for one minute and twenty seconds for a complete fusion that would give the print a longer washability and fusion. The ink sometimes does not fuse properly due to low voltage- Test the temperature with a laser gun. THE BEST COURSE IS TO CHECK ONE SHIRT OR PELLON FOR FUSION OF THE INK.
Store at room temperature and avoid storing in direct sunlight/humid air.


For a heavier deposit of plastisol ink, you need a higher solids emulsion and the application of two deposits of emulsion, two on the print side and two on the squeegee side. Cotton and 50/50 cotton/polyester fabrics print/ flash print for dark shirts and one stroke for lighter and white materials fully cured @ 330F. Store at room temperature and avoid storing in direct sunlight/humid air.
Highlights:
  • Non-phthalate high-opacity ink
  • There is no need for under-basing creamy & soft and very low wet tack for easy printing.
  • Tack-free formulation
  • Very bright colors and outstanding printing because of the creamy nature of our ink and ease of using this ink. There is no need to add reducers as the ink is ready for use and recommended for manual or automatic machines.


*Store at room temperature and avoid storing in direct sunlight/humid air.

**Caution: Do not dry clean after printing**




Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 8 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 March 18, 2024
Reviewer: FBA from USA  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 Maroon Ink November 22, 2019
Reviewer: Brandyi Ammons from lubbock, TX United States  
Ordered this plastisol ink to use on t-shirts and sweatshirts.  The ink is to think and stringy.  Had to use a thinner with a 156 screen.  Then it drys really thick. i do not recommend.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 September 3, 2019
Reviewer: Ty Ball from Lebanon, OH United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 August 7, 2019
Reviewer: johnny holguin from SAN ANTONIO, TX United States  
very,very,good

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 June 22, 2019
Reviewer: Yunior Enrique Tur Gonzalez from Dallas, TX United States  


Was this review helpful to you?

View All Customer Reviews