Fire Red Plastisol Ink With High Opacity
High opacity Fire Red Plastisol Ink, from screeningsuppliesstore.com is an exceptionally high opacity ink that saves you money by avoiding an under-base in most cases and less application. This Fire Red Plastisol ink is pure red color. If you are printing on a light color or white shirt, you will get a sharper color as compared to a standard Fire red or dark red ink.
Note: We also manufacture colors for 100% polyester, nylon, and PVC under Mustang series. Please, call to find out prices.
Recommended Application Fire Red Plastisol Ink:
MESH 86-110 for dark shirts- you need to apply a heavier deposit of Plastisol ink for coverage on dark shirts. Use 110-305 mesh count for lighter colors. There are some heavy shirts such as sweatshirts that may require an under-base. The idea is that whenever you are avoiding under-base, make sure that you apply two heavier coats of ink on dark shirts- try it first, chances are that you may not need under-base.
Squeegee 60 -70 A
Use any direct emulsion to make screens- We recommend higher solid emulsion such as one part SBQ "QXL" (44% Solids). For a heavier deposit of Plastisol ink, you need a higher solid emulsion and application of two deposits of an emulsion, two on the print side and two on the squeegee side.
Print flash/print/dryer for dark shirts- One stroke for light color shirts
Fusion temperature @ 350F
- Non-phthalate Plastisol ink
- Exceptionally opaque ink - may not require under base
- Creamy and very soft offering low tack and easy printing
- Tack free Plastisol ink
- Very bright color
- Great printing due to the creamy nature of this product
- This product is adjusted to right viscosity - if have to thin down the ink, use curable reducer.
- We recommend this product for both manual and automatic machine
*STORE AT ROOM TEMPERATURE AND AVOID STORING IN DIRECT SUNLIGHT/HUMID AIR.
CAUTION: DO NOT DRY CLEAN AFTER PRINTING