Home > Ink >

Orange Plastisol Ink

Orange Plastisol Ink


 
Alternative Views:


ADD TO CART: $25.00




Product Code: I-3011


Size for orange*:


Qty:  
Overview
 

Orange Plastisol Ink

Orange Plastisol is a high-opacity ink. Orange Plastisol Ink (COLOR MAY VARY FROM THE PICTURE) is a non-phthalate high-opacity plastisol ink for dark garments. It is recommended for cotton and 50/50- poly/cotton note:


We also carry plastisol ink for 100% polyester, PVC, and nylon. Just call, and we'll direct you right to it.

Suggested Application for Orange Plastisol:

Use mesh 110 for dark shirts - apply a heavier deposit of plastisol ink for coverage on dark shirts. Use 160-305 mesh count for lighter colors. Some heavy shirts, such as sweatshirts, may require an under-base. So whenever you are avoiding an under-base, make sure that you put a little two heavier coats - try it first. There is a possibility that you may not require an under-base. Use squeegee 60 -70 and use any direct emulsion to make screens - we recommend high solid one part "QXL" (45% solids).

For a heavier deposit of plastisol ink, you need a higher solids emulsion and the application of two deposits of emulsion, two on the print side and two on the squeegee side. Cotton and 50/50 cotton/polyester fabrics print/ flash print for dark shirts and one stroke for lighter and white materials fully cured @ 330F
  • The dryer has to be maintained so that the temperature at the print is at 320-350F for one minute and twenty seconds for a complete fusion that would give the print a longer washability and fusion. The ink sometimes does not fuse properly due to low voltage- Test the temperature with a laser gun. THE BEST COURSE IS TO CHECK ONE SHIRT OR PELLON FOR FUSION OF THE INK.
Store at room temperature and avoid storing in direct sunlight/humid air.


For a heavier deposit of plastisol ink, you need a higher solids emulsion and the application of two deposits of emulsion, two on the print side and two on the squeegee side. Cotton and 50/50 cotton/polyester fabrics print/ flash print for dark shirts and one stroke for lighter and white materials fully cured @ 330F store at room temperature. Avoid storing in direct sunlight/humid air.
Highlights:
  • Non-phthalate high-opacity ink
  • There is no need for under-basing creamy & soft and very low wet tack for easy printing
  • Tack-free formulation
  • Very bright colors and outstanding printing because of the creamy nature of our ink and ease of using this ink. There is no need to add reducers as the ink is ready for use and recommended for manual or automatic machines.


*Store at room temperature and avoid storing in direct sunlight/humid air.

**Caution: Do not dry clean after printing**


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great Color August 9, 2022
Reviewer: Grant Davis from Tracy, CA United States  
This is a great orange color

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good ink. May 15, 2022
Reviewer: Thomas Johnston from WILLOW, NY United States  
Good solid opacity. Good flow. Good price.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Orange September 25, 2019
Reviewer: Victor Villalobos from Lizella, GA United States  
Excellent color, easy app. True orange, price unbeatable, great quality..

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 August 7, 2019
Reviewer: johnny holguin from SAN ANTONIO, TX United States  
good ink

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent!! July 25, 2017
Reviewer: Fred Mclorey from Boston, MA  
Tried this ink on a dark garment and the results were great... Highly recommend

Was this review helpful to you?