Home > Adhesives >

AlbaChem Safe-T-Tack Aerosol Adhesive

AlbaChem Safe-T-Tack Aerosol Adhesive


 
ADD TO CART: $9.85



Product Code: A-1788
Qty:

Overview
 

AlbaChem Safe-T-Tack Aerosol Adhesive


AlbaChem Safe-T-Tack Aerosol water-based adhesive in an aerosol can is a unique product that combines the safety of a water-based adhesive with the convenience of an aerosol can. Evenly sprays adhesive on the pallet but due to the weight of the product, overspray is minimal compared to traditional solvent based aerosol adhesives. Safe-T-Tack aerosol sprays on wet but tacks immediately when flashed. When used on hot pallets, tack is immediate.

Highlights for Safe-T-Tack by Albachem:

  • Perfect Tack
  • Stable at High Temperatures
  • Last Significantly Longer than Standard Aerosol Pallet Adhesives
  • Tack re-activated with water
  • VOC Compliant & Odorless
  • Great for reapplication on hot pallets when printing on fleece

Directions:
Shake well before using. Hold can 8 to 10 inches from surface to be sprayed. Use a sweeping motion when spraying. Evenly coat pallet and allow to air dry or flash for immediate tack. Print until more tack is needed then re-apply. Adhesive tacks-up quickly on hot pallets. Tack may be reactivated by wiping pallet with damp cloth or spraying pallet with water.


PDFAlbaChem Safe-T-Tack Aerosol MSDS

PDFAlbaChem Safe-T-Tack Aerosol TDS

Average Rating: Average Rating: 1 of 5 1 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
1 of 5 August 2, 2020
Reviewer: Stephanie Kammerdiener from Penrose, CO United States  
We order 3 cans and all three cans would not hardly spray at first then stopped spraying after the 3rd application to the platent.  We didn't even get 1 can worth of adhesive from one can.

Was this review helpful to you?