Home > Emulsion > Photopolymer Emulsion >

QXL Photopolymer Emulsion

QXL Photopolymer Hybrid Emulsion


 
Alternative Views:


ADD TO CART: $16.99




Product Code: E-0119


Size for QxL*:


Qty:  
Overview
 

QXL Photopolymer Emulsion for Plastisol and Solvent ink (Hybrid SBQ Emulsion).

QXL Photopolymer Emulsion HYBRID for Plastisol and Solvent ink is based on SBQ and photo monomers technology. QXL Photopolymer Emulsion is fast drying and exposing- QXL carries some of the fastest monomers with very effective photo-initiators to make the product faster, especially for LED lights. QXL is high in solids and viscosity- You do not have to apply too many coatings to get the optimum emulsion film thickness.

This Photopolymer emulsion is recommended for Plastisol, Solvent, and water-based ink systems.

QXL may also work for water-based inks by adding a small amount of Diazo. QXL offers durability and excellent image, yielding a smooth, even coating, sharp edges, and high resolution. Since this emulsion is based on SBQ technology, it does not require Diazo for Plastisol and Solvent inks and should be handled only in a yellow-safe light environment. Because of their high solids content, coated screens dry in less time and require fewer coats. In most cases, one coat on each side of the screen is all that is needed.

Guideline for QXL Photopolymer Emulsion:


QXL(Blue) is a well-proven SBQ one-part photopolymer used by some of the largest printers in the country. QXL is a suitable replacement for QTX, ORANGE, QLT, CHROMA-LIME, CHROME-BLUE, PL2, PV, HVP, LBX, and HXT.
Before applying the emulsion to the screen, make sure that the screen is cleaned with a Degreaser and dried thoroughly. Let the emulsion dry and then wash with a soft mist of water to create the image.

Highlights For QXL:

  • QXL may replace any one-part (SBQ) emulsion in the screen printing industry.
  • Works for Plastisol, water-based (Diazo should be added) ink systems, and solvent ink systems
  • heavy so that you may not require too many coats - If a thinner viscosity is required, add four oz. of water to a gallon of QXL.
  • Dries faster due to higher solids
  • Very fast exposure
  • long shelf life
  • easy to re-claimer
  • very high resolution
  • zero pinholes if applied properly
  • excellent edge definition and bridging
  • Works well with LED light- 4-7 seconds exposure time
  • Specifications Data:
  • Color: Blue
  • Solids: 46% +- 1
  • Viscosity: 13,000/15,000 cps at 20 rpm-26C

Exposure Times:

QXL is a very fast-exposing emulsion. In some LED units, it may require 4-5 seconds to expose 1/1 application. The best suggestion is to use the wedge step procedure before exposure to determine the optimum exposure time. For LED units, start with 4 to 7 seconds and go up to 10 seconds. The distance for the exposure should be about one and a half times the diagonal measurement of the artwork from point light sources. Yellow and orange mesh require at least 50% more time than white mesh. The times below are based on the white mesh at approximately 40 inches. Metal Halide 25 seconds 3000 watts carbon arc 20 seconds 60 amps fluorescent tubes 35-60 seconds 40 watts
Exposure times below were set for 5 KW units at 40" from the frame.
110 yellow polyester mono-filament mesh
*coating coater suggested
technique edge min. exp. time
1 by 1 round 27 sec.
1 by 2 round 30 sec.
1 by 3 round 40 sec.

230 yellow polyester mono-filament mesh
*coating coater suggested
technique edge min. exp. time
1 by 1 round 18 sec.
1 by 2 round 20 sec.
1 by 3 round 25 sec.
If the image does not open, that means you overexposed the emulsion.
* Though QXL Photopolymer emulsion yields a pinhole-free screen, in case of any pinholes, use block-out to close the pinholes.

*To reclaim, use: XER 5, XER10, or XER25 (diluted 4 to 1, 9:1, and 24 to one). Reclaimer to remove the unwanted stencil.

This is what QXL offers:

  1. The latest technology has given screen printers the tools to quickly expose hybrid dual-cure SBQ emulsions that should have good latitude and may be used for all ink systems.
  2. The emulsion should dry faster and should resist humidity.
  3. It should bring high clarity and sharpness to the image, meaning good resolution and high edge definition.
  4. It should have high solids to give high E.O.M. (for two-to-one coating on 110 counts, 23 microns) and not clog filters on the I-unit from M&R or the sewer system.
  5. Reclaim as quickly as possible, even when the Screen Printer uses stronger Press Wash and Ink degradant. A good Emulsion can withstand solvents.
  6. After easy reclaiming, there should be no haze left from the emulsion.
  7. The emulsion may be used for Plastisol, Solvent, UV, and water-based inks.
  8. The Emulsion should have excellent coating properties, good flow, and leveling so that it goes onto the screen evenly and smoothly.
  9. The Emulsion should not give way to pinholes on a clean screen.
  10. The emulsion should furnish a strong stencil that should produce the longest run possible.
  11. It should be able to produce half-tones
  12. One emulsion for all ink systems—QXL is recommended for UV, solvent, and Plastisol ink; adding Diazo works perfectly for water-based ink.
Screen Printing Emulsion, QXL Photopolymer Emulsion

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 23 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great emulsion August 15, 2023
Reviewer: Double J Signs & Tees from LYONS, GA United States  
It's the only emulsion I use on white mesh! High solids. Works great on low or high mesh screens usually with 1 coat on each side with very few pin holes.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome at a decent price August 21, 2022
Reviewer: alan mcmanus from kershaw, SC United States  
I love shopping here because of the prices !! This emulsion is awesome and don’t rob me!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome ink June 18, 2022
Reviewer: alan mcmanus from kershaw, SC United States  
This ink is the best ink I’ve used yet in my shop. So easy to print with

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent Value March 27, 2021
Reviewer: joyce coursey from Lyons, GA United States  
This emulsion is a very good value. It works well, and exposes fast.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 It works best for me January 30, 2021
Reviewer: tracy obrien from Palm coast Fl United States  
The ease of use, doesn’t wash out your design. The price you can’t beat, shipping and customer service good as well. This is my go to emulsion

Was this review helpful to you?

View All Customer Reviews