Home > Ink >

Light Royal Blue Plastisol Ink

Light Royal Blue Plastisol Ink


 
Alternative Views:


ADD TO CART: $21.00




Product Code: I-3007


Size for reflex*:


Qty:  
Overview
 

Light Royal Blue Plastisol Ink

Light Royal Blue Plastisol is a high-opacity ink. (Color may vary from the picture) is a high-opacity ink with exceptional qualities. This non-phthalate plastisol ink is designed for cotton and 50/50 poly/cotton fabrics. (We offer plastisol ink options for 100% polyester, PVC, and nylon. Feel free to contact us for pricing details.)

    Key Features:

    • Non-phthalate formulation, ensuring a safe printing experience with high opacity.
    • Under-basing may be needed for some fabrics,
    • Tack-free formulation eliminates any concerns of adhesion or sticking.
    • Offers vivid and vibrant colors, resulting in outstanding print results.
    • The creamy nature of the ink allows for effortless use without the need for adding reducers. It is suitable for both manual and automatic printing machines.

    Application Recommendations:

    • For dark shirts, we recommend using mesh counts of 110. Since darker fabrics require better coverage, a heavier deposit of plastisol ink is necessary.
    • Lighter colors can be achieved using mesh counts from 160 to 305. However, some heavy shirts, like sweatshirts, might still require an under-base.
    • When avoiding an under-base, consider applying slightly heavier coats of ink (2 coats). We suggest trying this method first, as it often eliminates the need for an under-base.
    • For screen printing, use a direct emulsion with a squeegee of 60 to 70 durometers. We recommend a high-solid, one-part emulsion like "QXL" (45% solids).
    • If you desire a thicker layer of plastisol ink, opt for a higher solids emulsion and apply two coats of emulsion on both the print and squeegee sides.
    • When printing on cotton and 50/50 cotton/polyester fabrics, utilize the print/flash print technique for dark shirts and one stroke for lighter and white materials. Ensure complete curing at 350°F for one minute and twenty seconds.

    The dryer has to be maintained so that the temperature at the print is at 320-350F for one minute and twenty seconds for a complete fusion that would give the image a longer washability and total fusion. The ink sometimes does not fuse properly due to low voltage- Test the temperature with a laser gun. THE BEST COURSE IS TO CHECK ONE SHIRT OR PELLON FOR FUSION OF THE INK.


*Store at room temperature and avoid storing in direct sunlight/humid air.

Do not dry clean!

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 February 19, 2018
Reviewer: Amilcar Tunon from Miami, FL United States  
nice color and soft

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Exactly what we needed for 4th of July project July 6, 2017
Reviewer: Mika A from Savannah, GA  
Exactly what we needed for 4th of July project

Was this review helpful to you?