Home > Adhesives >

AlbaChem Water Based Screen Opener
AlbaChem Water Based Screen Opener


 
ADD TO CART: $7.90



Product Code: A-1632
Qty:

Overview
 

AlbaChem Water Based Screen Opener

AlbaChem Water Based Screen Opener safely open clogged screens of dried ink. The foaming cleaner works fast without leaving any film or oily residue. It may also be used to clean ink and dirt from the printing presses.

Highlights for AlbaChem Water Based Screen Opener :

  • Instantly unclogs any screen.
  • Use while still on press
  • Works on all types of ink, fresh or old.
  • Fresh pleasant scent. Leaves no film.
  • Contains no APEO (alkylphenol ethoxylates) or NPEO (nonylphenol ethoxylates).
Directions:
Shake well before using. Spray from a distance of 6 to 8 inches with a circling movement into the top screen when- ever clogging occurs or before this is expected. A very thin application on to the dried-in areas is all that is necessary; then 2 or 3 squeegee passes with open the mesh completely. For use only with water based inks. Only use on screen made with photographic (direct or indirect) stencils or lacquer proof knife-cut films
PDFAlbaChem Water Based Screen Opener MSDS

PDFAlbaChem Water Based Screen Opener TDS

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Good product July 10, 2022
Reviewer: anthony christian from strawberry plains, TN United States  
This works well for opening screen during mid printing.

Was this review helpful to you?